Series of Brass Fitting Manufacturer

April 4, 2022April 4, 2022 Dev Jain 0 Comments

Series of Brass Fitting Manufacturer – HONGDA is a company established in 1996 with Yuhuan Hongda Plumbing Equipment CO., Ltd. It is a fitting series company situated in Chumen Town, Yuhuan City, Zhejiang Province, on the eastern shoreline of China. Hongda offers metal valves and fitting answers for different applications with the involvement of 26 years. Brass fitting manufacturer

deals with best series. If it’s not too much trouble, peruse our expanded scope of valves and fittings to our client’s exclusive plans. Here, you see all the valves that best fit your use.

The company helps in delivering a wide range of metal balls, metal line fitting, & metal bibcock. The enlisted capital of the organization is 4 million, and the yearly result esteem is 70 million yuan.

Contents

1 Brass fitting series
2 Conclusion

Brass fitting series

Hongda is the main maker of Threaded Brass Fittings in China. Anything that meets your requirements in plumbing and modern parts and applications, our quality craftsmanship and client care are good.

1. Brass hose connector fittings

The brass hose connector fittings come in different sizes, I.e., 12, 16, 20, 25mm. The working pressure of the fittings is PN16 / 200Psi along with the temperature variation from 0 to 120°C. It has good working durability that helps perform the main applications, i.e., water, oil, other non-corrosive liquids.

2. Brass Hexagonal sleeve

The hexagonal brass sleeve comes with different sizes, working pressure, and durability. The size of the sleeve is 3/8″~ 2″ with its best PN16 / 200 Psi working pressure. The sleeve has working durability from 20 to 120°C with 10,000 cycles of working durability. Its main applications are water, gas other non-corrosive liquids.

3. Brass 90-degree elbow fittings

The size of the brass 90 degrees varies from different ranges. The size of the HONGDA brass is 3/8″~ 2″ with the PN16 / 200 Psi working pressure. It has the best working durability of 10000 cycles. Water, gas, and other non-corrosive liquids are some main applications of brass.

4. Forged DZR brass elbow

The forged DZR brass elbow comes with different sizes, working pressure, and durability. The size of the sleeve is 3/8″~ 2″ with its best PN16 / 200 Psi working pressure. The sleeve has working durability from 20 to 120°C with 10,000 cycles of working durability. Its main applications are water, gas other non-corrosive liquids.

5. Elbow brass PEX fittings

The elbow brass PEX fittings come in different sizes, I.e., 16, 20, 26, 32. It has a bore that is known as a standard bore. The working pressure of the fittings is PN16 / 200Psi, along with the temperature variation from 20 to 120°C. It has good working durability that helps perform the main applications, i.e., water, oil, other non-corrosive liquids.

6. Reduced brass tee hose fittings

The reduced brass tee hose fittings come in different sizes, I.e., 12, 16, 20, 25, 32 mm. It has a bore that is known as a standard bore. The working pressure of the fittings is PN16 / 200Psi, along with the temperature variation from 20 to 120°C. It has good working durability that helps perform the main applications, i.e., water, oil, other non-corrosive liquids.

7. Brass gas fitting

The HONGDA brass fitting manufacturer produces two different sizes, I.e., 3/8″ Male To 1/4″ Female. The bore of the brass has a standard bore along with the gas application. And it has a working pressure that varies from PN16 / 200 Psi with the capability of 20 to 120°C working pressure. The material used in it is of different categories: DZR, Hpb 57-3, and Hpb59-1.

8. Long thread double nipple fitting

The size of the long thread double nipple fitting varies from 3/8″~1″ with the PN16 / 200Psi. It has a good working temperature that varies from 20 to 120°C with 10,000 cycles of working pressure.

9. OD brass flare

The OD brass flare of HONGDA comes in different sizes, I.e.5/8″ OD flare. The bore of the OD brass has a standard bore along with the gas application and threaded cap. And it has a working pressure that varies from PN16 / 200 Psi with the capability of 20 to 120°C working pressure. The material used in it is of different categories: DZR, CW617N, and Hpb59-1.

10. Brass male plug fittings

The brass male plug fittings come in different sizes, working pressure, and durability. The size of the sleeve is 1/2″~ 1″ with its best PN16 / 200 Psi working pressure. The sleeve has working durability from 20 to 120°C with 10,000 cycles of working durability. The main applications of the male plug fittings are water, gas other non-corrosive liquids.

Conclusion

All brass valves come at reasonable prices with the best quality. Use such brass valves in the industrial areas and your main areas. All the series of brass valves come with the best prices.

You may also like:

TechBenzy

Series of Brass Fitting Manufacturer